Anche a me sembra il blu.
"When a pump is first entered into Pulse Mode, you must set the maximum pump speed by adjusting the dial. When the desired speed is achieved, press the Set button to lock this speed. The LED will now begin to blink. This blinking LED represents the pulsing frequency. Now adjust the dial to make the pump pulse faster or slower. To save this wave, press and hold Set until the LED flashes green/white indicating that the wave is saved."
Tradotto: Seleziona il blu e seleziona la velocità desiderata. Premi il tasto SET. Il led inizierà a lampeggiare. Imposta la frequenza dell'impulso. Per salvare, premi e tieni premuto il tasto SET finchè il led non comincerà a lampeggiare verde/bianco. Tutto qua.
Questo per la 40, per la 20 credo sia lo stesso.
__________________
Ciao Max -28
|