Ho capito... si deve cercare il codice prodotto finale con t55051... almeno credo.
------------------------------------------------------------------------
STANDARD ORDER CODES AND BINS (XM-L ANSI COOL WHITE)
XLamp XM-L LED Standard Order Codes - White
Min. Luminous
Flux (lm)
@ 700 mA* Chromaticity Regions Kit Number
Group Flux (lm)
ANSI Cool White (5000 K – 8300 K)
T5 260
0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S 0000T5051
1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S 0000T5053
1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 0000T5050
T6 280
0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S 0000T6051
1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S 0000T6053
------------------------------------------------------------------------
|
Originariamente inviata da Kj822001
|
|
..cerchiamo di individuare che led montare ossia marca modello numero e da dove acquistare poi si pensa al contorno.. Gli xm-l t6 della cree servirebbero con codice bin 0A ma dove li troviamo??
|
Mi pare sia questo da led-tech.de dalle specifiche:
Part Number: LT
31
CREE XM-L T6 Emitter
Cree XMLAWT-0000T6051
Viewing Angle: 125°
Height: 3.02mm
Width: 5.00mm
Depth: 5.00mm
Emitting Color: white
Lumen min.: 280
Lumen max.: 975
Kelvin min.: 5700
Kelvin max.: 6100
mA test.: 700 mA
mA typ.: 700 mA
mA max.: 3000 mA
V typ.: 2.9 V
V max.: 4 V
Reverse Voltage: 5 V
Watt: 2,03 W
Datasheet: Click here!
Binning & Labeling: Click here!
The new Cree XLamp XM-L in T6 top rank!
The XLamp XM-L LED is the industry’s highest performance, single-die white lighting-class LED. XLamp XM-L is 20% more efficient than XLamp XP-G at the same current, and can deliver 1000 lumens with 100 lumens per Watt efficacy. The XLamp XM-L LED offers Cree’s industry-leading features: wide viewing angle, symmetrical package, unlimited floor life and electrically neutral thermal path.
XLamp XM-L LEDs can enable LED light into new applications that require tens of thousands of lumens, such as high bay and high-output area lighting. XM-L is also the ideal choice for lighting applications where high light output and maximum efficacy are required, such as LED light bulbs, outdoor lighting, portable lighting, indoor lighting and solar-powered lighting.
Successful usage of high power LEDs:
Heat management
Applications with high power LEDs need enduring, adequate and plane heat conduction from the first moment of use. It is very important and neccessary to get the heat off the devices to ensure the maximum light output, lifetime and efficiancy.
Drive management
LEDs should be run with a constant current in addition to the manufacturers recommendations. To ensure this we recommend to take constant current power supplies because resistors are always a risk factor in high power LED applications.
EMC protection
LEDs are sensitive against heat and electric charge. Please avoid any kind of short circuits or electric discharge to the illuminant. The chip can be damaged or even destroyed.
Storage / JEDEC level
The storage temperature should be from
°C up to + 80°C in dry ambience. After opening a sealed bag the content should be mounted rapidly. Once absorbed humidity can be removed by tempering the LEDs in some cases. More information can be found in the manufacturers datasheets or on the manufacturer homepages.
Soldering conditions
Each LED has its own soldering conditions that the user should pay attention to. After the launched lead free processing specifications many standarts have changed. Information about recommended soldering can be found in the manufacturers datasheets or on the manufacturer homepages.
Resistor for 5V-Betrieb: 3 Ohm / 1.47 W
Resistor for 9V-Betrieb: 9 Ohm / 4.27 W
Resistor for 12V-Betrieb: 13 Ohm / 6.37 W
Resistor for 14V-Betrieb: 16 Ohm / 7.77 W
individual resistor calculation
individual resistor calculation
Quantity Price per pcs.
1 - 99 6,90 €
ab 100 Special price
Prices incl. VAT with
additional shipping costs
Vai M... info info... spremiamo il forum! 
Modalità lineare
