Riporto dal sito della KENT
http://www.kentmarine.com/saltwater/tcbab2.html
--------------------
Calcium Testing Suggestion:
Calcium testing in marine systems is fraught with difficulties. Test kits generally don not work well in the ranges that we run in reefs and many ions in marine water interfere with the kit. If your calcium level does not make sense, try diluting the aquarium water sample 50/50 with distilled, deionized or R/O water and testing. Multiply the result by 2. This will both save on valuable reagents in your kit and generally give a more accurate reading. (You may want to consult with the kit manufacturer to determine that doing this will give valid results with your brand of kit).
--------------------
Sembra insomma che consiglino di fare i test con tutto al 50%, quindi metà acqua dell'acquario e metà osmosi, ed anche metà dei liquidi/reagenti e poi raddoppiare i valori ottenuti.
Alcuni test già indicano questa possibilità, ad esempio il mio test del KH.
Vale anche per gli altri? Addirittura dicono che si possono ottenere valori più precisi...mentre sulle istruzioni del mio test dicono l'esatto contrario, che insomma dimezzare le "dosi" porta ad una lettura meno precisa...