[Rymond]

Original title: Management Specification for 5S Fixed Identification of Tools in Factory Workshop Source: Internet 1. Purpose Through 5S activities on tools and toolboxes, redundant tools and sundries are removed, and fixed and visual management is carried out, which is conducive to improving the site, eliminating potential safety hazards, improving production efficiency, promoting TPM of tools,custom tape measure, ensuring quality and reducing costs. (Click to register:) 2. Style The tools on the production site shall not be mixed with any materials. One of the following methods shall be reasonably selected for positioning according to the actual situation: 1) bracket positioning Make the bracket (in the shape of iron ring, iron cylinder, iron hook,custom tailor tape, etc.) and mark the name and specification of the tool with a label beside it, as shown in the following figure: Expand the full text 2) Worktable positioning Make a corresponding partition for each tool on the workbench, or make a partitioned tool tray beside the workbench for positioning, and indicate the name and specification of the tool with a label beside it, as shown in the following figure (click to register:): 3) Positioning of projection plate The yellow projection of the manufacturing tool shall be fixed; for the occasion where it is inconvenient to make the yellow projection, the scriber shall be used to make the projection of the tool, tailor measure tape ,bra tape measure, or the yellow instant sticker with a width of 10mm shall be used to fix the outline of the object, and the name and specification of the tool shall be indicated with a label beside it, as shown in the following figure: 4) Tool box positioning Make a corresponding partition for each tool in the tool box for positioning, and paste the positioning diagram of the tools in the tool box outside the tool box, as shown in the following figure: 5) Tool rack positioning Labels shall be established for the tool rack to identify the number of the tool rack, the person in charge and the number of layers to be used, and labels shall be used to identify the name, specification and quantity of the tools in each layer. The tools in the rack shall be positioned as required, as shown in the following figure: 6) Toolbox positioning The toolbox is required to establish a location drawing outside the box, identifying the toolbox number, the person in charge and the location, name and quantity of the built-in tools; it is required to establish a location drawing or list inside the box, identifying the location, name and quantity of the built-in tools in the location drawing, and specifying the name, specification and quantity of each layer of tools in the list. The tools in the box should be positioned as required, as shown in the following figure (click to register:). 3 Numbering regulations for tool box and tool rack Toolbox and tool rack are numbered by each area, such as "GA01". Through the 5S improvement activities of tools and toolboxes, we not only reduce the search waste in our work,personalised tailor tape, but also greatly improve our work efficiency. The effect of the improvement of tool cabinets is clear and obvious. There are still five days to go before the activity. Hurry to sign up for our "" and show our own high-value tool cabinets, so that more enterprises and factories can learn from it and improve.. Walk into GAC TOYOTA and see their lean management: Walk into SAIC Volkswagen and see their lean management: New book recommendation: Friends' Association Activities: Committed to the popularization and application of lean management in hospitals Making Lean Popular in Hospitals Poke it before you leave, leave your precious handprint and return to Sohu to see more Responsible Editor:. tape-measure.com