[micos_1972]

nulla non funonzia...
questo è il mio pde funzionante con il ritardo pompe, aggiungetemi voi il ritardo skimmer vediamo se cambia il risultato....
// Autogenerated file by RAGen (v1.0.4.92), (04/10/2011 18:17)
// RA_041011_1817.pde
//
// This version designed for v0.8.5 Beta 12 or later

/* The following features are enabled for this PDE File:
#define DosingPumpIntervalSetup
#define OverheatSetup
#define DateTimeSetup
#define VersionMenu
#define DisplayLEDPWM
#define wifi
#define RelayExp
#define RemoveAllLights
#define SaveRelayState
*/


#include <ReefAngel_Features.h>
#include <ReefAngel_Globals.h>
#include <ReefAngel_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <ReefAngel_EEPROM.h>
#include <ReefAngel_NokiaLCD.h>
#include <ReefAngel_ATO.h>
#include <ReefAngel_Joystick.h>
#include <ReefAngel_LED.h>
#include <ReefAngel_TempSensor.h>
#include <ReefAngel_Relay.h>
#include <ReefAngel_PWM.h>
#include <ReefAngel_Timer.h>
#include <ReefAngel_Memory.h>
#include <ReefAngel.h>


void setup()
{
ReefAngel.Init(); //Initialize controller
ReefAngel.SetTemperatureUnit(1); // set to Celsius Temperature

ReefAngel.FeedingModePorts = B11111001;
ReefAngel.WaterChangePorts = B00000000;
ReefAngel.OverheatShutoffPorts = B00000000;
ReefAngel.LightsOnPorts = B00000000;

// Ports that are always on
ReefAngel.Relay.On(Port1);
ReefAngel.Relay.On(Port8);
}

void loop()
{
ReefAngel.ShowInterface();
// accensione pompa dx
if (((NumMins(hour(),minute()) >= NumMins(0,00)) && (NumMins(hour(),minute()) <= NumMins(6,13))) || (NumMins(hour(),minute()) >= NumMins(12,00)) && (NumMins(hour(),minute()) <= NumMins(18,13))) ReefAngel.Relay.On(Port2);
else ReefAngel.Relay.Off(Port2);


// accensione pompa sx
if (((NumMins(hour(),minute()) >= NumMins(6,00)) && (NumMins(hour(),minute()) <= NumMins(12,13))) || (NumMins(hour(),minute()) >= NumMins(18,00)) && (NumMins(hour(),minute()) <= NumMins(23,59))) ReefAngel.Relay.On(Port3);
else ReefAngel.Relay.Off(Port3);
// Specific functions
ReefAngel.DosingPumpRepeat1(Port4);
ReefAngel.DosingPumpRepeat2(Port5);
ReefAngel.StandardFan(Port6);
ReefAngel.StandardHeater(Port7);
}

[LukeLuke]

#include <ReefAngel_Features.h>
#include <ReefAngel_Globals.h>
#include <ReefAngel_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <ReefAngel_EEPROM.h>
#include <ReefAngel_NokiaLCD.h>
#include <ReefAngel_ATO.h>
#include <ReefAngel_Joystick.h>
#include <ReefAngel_LED.h>
#include <ReefAngel_TempSensor.h>
#include <ReefAngel_Relay.h>
#include <ReefAngel_PWM.h>
#include <ReefAngel_Timer.h>
#include <ReefAngel_Memory.h>
#include <ReefAngel.h>


void RitardoSkimmer(byte SKPort, byte SKDelay)
{
unsigned long d = SKDelay;
d *= SECS_PER_MIN;
if (now()-RAStart > d) ReefAngel.Relay.On(SKPort);
}

void setup()
{
    ReefAngel.Init();  //Initialize controller
    ReefAngel.SetTemperatureUnit(1);  // set to Celsius Temperature

    ReefAngel.FeedingModePorts = B11111001;
    ReefAngel.WaterChangePorts = B00000000;
    ReefAngel.OverheatShutoffPorts = B00000000;
    ReefAngel.LightsOnPorts = B00000000;

    // Ports that are always on
    ReefAngel.Relay.On(Port1);
   // ReefAngel.Relay.On(Port8);

if ( RAStart == 0 ) RAStart = now();

}

void loop()
{
    ReefAngel.ShowInterface();
// accensione pompa dx
if (((NumMins(hour(),minute()) >= NumMins(0,00)) && (NumMins(hour(),minute()) <= NumMins(6,13))) || (NumMins(hour(),minute()) >= NumMins(12,00)) && (NumMins(hour(),minute()) <= NumMins(18,13))) ReefAngel.Relay.On(Port2);
else ReefAngel.Relay.Off(Port2);


// accensione pompa sx
if (((NumMins(hour(),minute()) >= NumMins(6,00)) && (NumMins(hour(),minute()) <= NumMins(12,13))) || (NumMins(hour(),minute()) >= NumMins(18,00)) && (NumMins(hour(),minute()) <= NumMins(23,59))) ReefAngel.Relay.On(Port3);
else ReefAngel.Relay.Off(Port3);
    // Specific functions
    ReefAngel.DosingPumpRepeat1(Port4);
    ReefAngel.DosingPumpRepeat2(Port5);
    ReefAngel.StandardFan(Port6);
    ReefAngel.StandardHeater(Port7);

RitardoSkimmer(Port8, 1); // 2 minute delayed on


}