....l'americano è on line...ma proprio on line..-05-05-05...vi riporto la sua risposta integrale quasi immediata..mi sembra interessante.... e anche la mia successiva perchè non mi è chiara una cosa....scusatemi per il mio inglese....ma l'importante è capirsi.....
________________________________________
Da: Rob Moneyhan [mailto:rmoneyhan@central-aquatics.com]
Inviato: mercoledì 10 novembre 2010 16.54
A: Giuseppe Iapoce
Oggetto: RE: Kent Marine Contact
Kent Tech CB part A and B and Nano Part A and B are a calcium buffer and carbonate buffer. Part A is the Calcium buffer and Part B is a Carbonate buffer.
Part A has the following:
CALCIUM CHLORIDE (010043
-4) < 10
MAGNESIUM CHLORIDE (7786
-3) < 25
POTASSIUM CHLORIDE (7447-40-7) < 10
STRONTIUM CHLORIDE (10025
-4) < 10
As well as a bunch of minor trace elements.
Part B has the following:
CARBONIC ACID, DISODIUM SALT COMPOUND WITH HYDROGEN PEROXIDE (497
-8) <
0 - 20
CARBONIC ACID, MONOSODIUM SALT (144
-8) < 0 - 20
The disodium is Sodium Bicarbonate and the monosodium is Sodium Carbonate.
Tech M has Magnesium Sulfate in it as well. The high concentration mixed with either part A or B will cause a reaction. They can only be mixed together in certain concentrations and in a certain order and time frame. Just not a good idea to mix them. It won’t hurt anything in the tank, but you would just be wasting money and chemicals.
Regards,
Rob Moneyhan
Central Aquatics Tech Lead
Phone# 888
5
27 or 414
3
44
Fax# 800
8-0396 or 414
1-9682
Email:
rmoneyhan@central.com
sostanzialmente a parte l'interessante composizione (che non ho mai notato se è riportata nelle confezioni..) ribadisce che il magnesio nel kent va a immobilzzarsi in carbonati....alla vasca non succede nulla ma si buttano via integratori e soldi...ma sopratutto dice che gli A e i B sono i buffer.
Ma noi non abbiamo sempre detto che i buffer sono quelli che servono per far crescere i valori di ca e kh singolarmente per poi mantenerli con A + B ??????
quindi la mia risposta con ulteriore domanda....
Sorry Rob,
in my knowledges, probably mistaken, KENT turbo CAlcium buffer e KENT dk proBuffer are “BUFFER” to improve calcium and kh to optimum level.
This to start a new tank. After I can use or a calcium reactor, medium or big tank, or Ca and kh integrators like KENT tech CB A and KENT tech CB B (or nanoreef A+B) to stabilization value in a small tank with very low adsorption rate and very little sump.
It’s correct?
Why do you say this “Kent Tech CB part A and B and Nano Part A and B are a calcium buffer and carbonate buffer. Part A is the Calcium buffer and Part B is a Carbonate buffer.”?
Nevertheless, my use of tech A + B is correct?
I’m dosing daily with dosing pump, while the turbo calcium buffer and dk probuffer I dosed only to reach the optimum level at start of the tank or when the Ca or kh level is lowing.
I’m right?