Per il RA contattate lukeluke, lui è il "guru".
L'ho avuto in mano solo due mesi e avevo impostato al 100% il pwm per tenere acceso un led lunare blu della ra.
I manuali sono su
www.reefangel.com .
Guarderei qui:
http://www.reefangel.com/Support.Abo...aded-code.ashx
"7. LED PWM Control
Daylight range from 0 to 100%
Actinic range from 0 to 100%
Setup of operating PWM settings for daylight and actinic LED lighting systems.
On LED lighting systems with dimming capability, one way of controlling the intensity of light generated by the system is by using PWM signal. A change on the duty cycle of the PWM signal will cause the LED lighting system to change its intensity.
This settings will determine which mode of dawn/dusk the controller will operate.
Reef Angel Controller is capable of changing PWM duty cycle from 0% to 100%, but not all LED drivers are capable of dimming on the same. Some of them have a cutoff and will not dim any lower than 15%. The Meanwell driver ELN-60
P is a good example. "