|
eccolo.... questo e' quello senza parametri wifi che non mi da problemi con il verify di arduino0022
// RAMenus.pde
//
// This version designed for v0.8.5 Beta 10 and later
#include <ReefAngel_Features.h>
#include <ReefAngel_Globals.h>
#include <ReefAngel_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <ReefAngel_EEPROM.h>
#include <ReefAngel_NokiaLCD.h>
#include <ReefAngel_ATO.h>
#include <ReefAngel_Joystick.h>
#include <ReefAngel_LED.h>
#include <ReefAngel_TempSensor.h>
#include <ReefAngel_Relay.h>
#include <ReefAngel_PWM.h>
#include <ReefAngel_Timer.h>
#include <ReefAngel_Memory.h>
#include <ReefAngel.h>
void RitardoSkimmer(byte SKPort, byte SKDelay)
{
unsigned long d = SKDelay;
d *= SECS_PER_MIN;
if (now()-RAStart > d) ReefAngel.Relay.On(SKPort);
}
void setup()
{
ReefAngel.Init(); //Initialize controller
ReefAngel.SetTemperatureUnit(1); // set to Celsius Temperature
if ( RAStart == 0 ) RAStart = now();
// Set the ports that get toggled on & off during the following modes
// To enable a port to be toggled, place a 1 in the appropriate position
// Uncomment and update as needed
// Port 87654321
//ReefAngel.FeedingModePorts = B10011100;
//ReefAngel.WaterChangePorts = B10011100;
//ReefAngel.OverheatShutoffPorts = B00001100;
//ReefAngel.LightsOnPorts = B00000110;
// Ports that are always on
// ReefAngel.Relay.On(Port8);
}
void loop()
{
ReefAngel.ShowInterface();
// Specific functions
ReefAngel.StandardATO(Port1);
ReefAngel.StandardLights(Port2);
ReefAngel.MHLights(Port3);
// ReefAngel.Wavemaker1(Port4);
// ReefAngel.Wavemaker2(Port5);
ReefAngel.StandardFan(Port6);
RitardoSkimmer(Port8, 2); // 2 minute delayed on
ReefAngel.StandardHeater(Port7);
}
--------------------------------
E questo e' quello che mi da l'errore
// RAMenus.pde
//
// This version designed for v0.8.5 Beta 10 and later
#include <ReefAngel_Features.h>
#include <ReefAngel_Globals.h>
#include <ReefAngel_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <ReefAngel_EEPROM.h>
#include <ReefAngel_NokiaLCD.h>
#include <ReefAngel_ATO.h>
#include <ReefAngel_Joystick.h>
#include <ReefAngel_LED.h>
#include <ReefAngel_TempSensor.h>
#include <ReefAngel_Relay.h>
#include <ReefAngel_PWM.h>
#include <ReefAngel_Timer.h>
#include <ReefAngel_Memory.h>
#include <ReefAngel.h>
// Labels for the web banner
#include <avr/pgmspace.h>
prog_char id_label[] PROGMEM = "savo69";
prog_char probe1_label[] PROGMEM = "Acqua";
prog_char probe2_label[] PROGMEM = "LED";
prog_char probe3_label[] PROGMEM = "Ambiente";
prog_char relay1_label[] PROGMEM = "ATO";
prog_char relay2_label[] PROGMEM = "Actinic";
prog_char relay3_label[] PROGMEM = "Halide";
prog_char relay4_label[] PROGMEM = "Powerhead%202";
prog_char relay5_label[] PROGMEM = "Powerhead%201";
prog_char relay6_label[] PROGMEM = "Chiller";
prog_char relay7_label[] PROGMEM = "Heater";
prog_char relay8_label[] PROGMEM = "Sump";
PROGMEM const char *webbanner_items[] = {
id_label, probe1_label, probe2_label, probe3_label, relay1_label, relay2_label,
relay3_label, relay4_label, relay5_label, relay6_label, relay7_label, relay8_label};
void RitardoSkimmer(byte SKPort, byte SKDelay)
{
unsigned long d = SKDelay;
d *= SECS_PER_MIN;
if (now()-RAStart > d) ReefAngel.Relay.On(SKPort);
}
void setup()
{
ReefAngel.Init(); //Initialize controller
ReefAngel.SetTemperatureUnit(1); // set to Celsius Temperature
if ( RAStart == 0 ) RAStart = now();
ReefAngel.LoadWebBanner(pgm_read_word(&(webbanner_ items[0])), SIZE(webbanner_items));
ReefAngel.Timer[4].SetInterval(180); // set interval to 180 seconds
ReefAngel.Timer[4].Start();
// Set the ports that get toggled on & off during the following modes
// To enable a port to be toggled, place a 1 in the appropriate position
// Uncomment and update as needed
// Port 87654321
//ReefAngel.FeedingModePorts = B10011100;
//ReefAngel.WaterChangePorts = B10011100;
//ReefAngel.OverheatShutoffPorts = B00001100;
//ReefAngel.LightsOnPorts = B00000110;
// Ports that are always on
// ReefAngel.Relay.On(Port8);
}
void loop()
{
ReefAngel.ShowInterface();
// Specific functions
ReefAngel.StandardATO(Port1);
ReefAngel.StandardLights(Port2);
ReefAngel.MHLights(Port3);
// ReefAngel.Wavemaker1(Port4);
// ReefAngel.Wavemaker2(Port5);
ReefAngel.StandardFan(Port6);
RitardoSkimmer(Port8, 2); // 2 minute delayed on
ReefAngel.StandardHeater(Port7);
// Web Banner stuff
if(ReefAngel.Timer[4].IsTriggered())
{
ReefAngel.Timer[4].Start();
ReefAngel.WebBanner();
}
}
|