AcquaPortal Forum Acquario Dolce e Acquario Marino

AcquaPortal Forum Acquario Dolce e Acquario Marino (http://www.acquariofilia.biz/forum.php)
-   Chimica ed integratori marino (http://www.acquariofilia.biz/forumdisplay.php?f=59)
-   -   qualcuno ha mai dato zeospur a luci accese? (http://www.acquariofilia.biz/showthread.php?t=361118)

Ink 22-03-2012 12:22

Giangi, presumo funzioni come ho detto varie volte, ovvero il rame, come altri metalli pesanti rimangono poco tempo disponibili "liberi" in acqua, perchè rapidamente vengono legati a molecole organiche che lo sequestrano e non lo lasciano usare ad altri.
Per questo devi mettere tutta la dose insieme, perchè così è tutta disponibile per i coralli per poche ore. Loro lo assorbono e lo fanno precipitare nello scheletro legandolo al calcio, dove rimane a contatto con il tessuto esplicando la sua azione tossica sulle zoox. Col tempo si deposita nuovo calcio sopra il rame, perdendo progressivamente l'effetto. Tanto più rapida è la crescita, tanto minore è la durata dello spur.

Il carbone usato prima dello spur aiuta perchè rimuove le molecole organiche che sequestrano il rame.

Achilles91 22-03-2012 17:50

Quote:

Originariamente inviata da Ink (Messaggio 1061550126)
Giangi, presumo funzioni come ho detto varie volte, ovvero il rame, come altri metalli pesanti rimangono poco tempo disponibili "liberi" in acqua, perchè rapidamente vengono legati a molecole organiche che lo sequestrano e non lo lasciano usare ad altri.
Per questo devi mettere tutta la dose insieme, perchè così è tutta disponibile per i coralli per poche ore. Loro lo assorbono e lo fanno precipitare nello scheletro legandolo al calcio, dove rimane a contatto con il tessuto esplicando la sua azione tossica sulle zoox. Col tempo si deposita nuovo calcio sopra il rame, perdendo progressivamente l'effetto. Tanto più rapida è la crescita, tanto minore è la durata dello spur.

Il carbone usato prima dello spur aiuta perchè rimuove le molecole organiche che sequestrano il rame.

se il gg dopo dosi boro e potassio i colori sono anche piu brillanti

sto capendo molte cose sullo spur ed elaborando una mezza teoria tutta da demolire#rotfl##rotfl##rotfl##rotfl#

Ink 22-03-2012 18:51

dai che le belle teorie mi piacciono

morganwind 24-03-2012 10:38

Per altro qualcuno ha notato che post spurgata gli animali pare abbiano un rateo di crescita superiore, per poi tornare al precedente trend.
Da capire bene anche questo aspetto...quasi come a dimostrare che con la solo fotosintesi, a determinate condizioni, la crescita aumenta

oceanooo 24-03-2012 10:48

Quote:

Originariamente inviata da Ink (Messaggio 1061544406)
lo spur funziona venendo assorbito dall'animale e depositato nello scheletro, da cui attua l'effetto tossico sulle zoox. Col tempo si deposita sopra nuova aragonite e perde di effetto.

Presumo che di giorno, in vasca, l'animale cresca di più ed assorba di più, perciò basta meno zeospur.
Se fosse vero, avrebbe molto più senso avere un ph alto di giorno, dare gli elementi a luci accese, usare più carbonato e meno bicarbonato nel balling e tante altre belle cose su cui ragionare... sarebbe una dimostrazione di quando il corallo calcifica di più in vasca.

guarda ink non voglio sembrarti sfacciato ma tu hai fonti per la tuo teoria ? xche a quanto risulta a me non è cosi...

Ink 24-03-2012 11:50

sì oceanoo ho fonti sia da parte di redsea, sul ciclo del ferro, sia da parte di un chimico su reef central direttamente sul rame...

qui ti posto quanto detto da Ram Sharon sul ferro, che ipotizzo abbia un comportamente simile al ramel:
As you probably know sea water contains many chemicals forms, from free ions through inorganic and organic molecules and up to large colloids connected to metals, this “soup” of chemicals increase the probability of spontaneous reactions causing elements to spontaneously switch between phases.



This phenomena is very typical to iron which is switched between seven forms from soluble free ions (Fe⁺³ , Fe⁺²) through inorganic molecules of Hematite and Ferrihydrate to Organic Iron humate and other colloids ( referred to “chelated” iron ) and up to precipitated iron in aragonite lattice.



The important issue we need to understand is that the iron changes its form all the time based on salinity, pH and most by alkalinity and the amount of organics and colloids in the water.

In a closed system like our aquariums, where there is high organic load and many dissolved organic colloids, the amount of free iron could be very small although the total iron could be very high. Usually this situation will lead to a darkening of the corals due to growth in zooxanthellae population and the outbreak of phytoplankton and other macroalgae, and still you may measure nill levels of iron. From the other hand , on very pure salt water, most iron will be as free iron ions which could be very toxic to the tank inhabitants. This is why when you are adding t colors C to 1 liter you can detect high iron level while few minutes later when you add the iron to the tank you measure levels around 0.05 ppm for several hours and the 0after 24 hrs. the iron may precipitated or is bond to organics.



e qui ti metto il link della discussione su RC
http://reefcentral.com/forums/showthread.php?t=2104096

Achilles91 24-03-2012 12:27

Quote:

Originariamente inviata da Ink (Messaggio 1061554181)
sì oceanoo ho fonti sia da parte di redsea, sul ciclo del ferro, sia da parte di un chimico su reef central direttamente sul rame...

qui ti posto quanto detto da Ram Sharon sul ferro, che ipotizzo abbia un comportamente simile al ramel:
As you probably know sea water contains many chemicals forms, from free ions through inorganic and organic molecules and up to large colloids connected to metals, this “soup” of chemicals increase the probability of spontaneous reactions causing elements to spontaneously switch between phases.



This phenomena is very typical to iron which is switched between seven forms from soluble free ions (Fe⁺³ , Fe⁺²) through inorganic molecules of Hematite and Ferrihydrate to Organic Iron humate and other colloids ( referred to “chelated” iron ) and up to precipitated iron in aragonite lattice.



The important issue we need to understand is that the iron changes its form all the time based on salinity, pH and most by alkalinity and the amount of organics and colloids in the water.

In a closed system like our aquariums, where there is high organic load and many dissolved organic colloids, the amount of free iron could be very small although the total iron could be very high. Usually this situation will lead to a darkening of the corals due to growth in zooxanthellae population and the outbreak of phytoplankton and other macroalgae, and still you may measure nill levels of iron. From the other hand , on very pure salt water, most iron will be as free iron ions which could be very toxic to the tank inhabitants. This is why when you are adding t colors C to 1 liter you can detect high iron level while few minutes later when you add the iron to the tank you measure levels around 0.05 ppm for several hours and the 0after 24 hrs. the iron may precipitated or is bond to organics.



e qui ti metto il link della discussione su RC
http://reefcentral.com/forums/showthread.php?t=2104096

ecco forse spiegato il perche quando facevi il test ti dava sempre zero anche dosandone tanto

Ink 24-03-2012 13:08

sì il motivo è quello... infatti questo un tralcio della discussione che faci a suo tempo con Sharon Ram, biologo della redsea.

oceanooo 24-03-2012 15:14

Quote:

Originariamente inviata da Ink (Messaggio 1061554181)
sì oceanoo ho fonti sia da parte di redsea, sul ciclo del ferro, sia da parte di un chimico su reef central direttamente sul rame...

qui ti posto quanto detto da Ram Sharon sul ferro, che ipotizzo abbia un comportamente simile al ramel:
As you probably know sea water contains many chemicals forms, from free ions through inorganic and organic molecules and up to large colloids connected to metals, this “soup” of chemicals increase the probability of spontaneous reactions causing elements to spontaneously switch between phases.



This phenomena is very typical to iron which is switched between seven forms from soluble free ions (Fe⁺³ , Fe⁺²) through inorganic molecules of Hematite and Ferrihydrate to Organic Iron humate and other colloids ( referred to “chelated” iron ) and up to precipitated iron in aragonite lattice.



The important issue we need to understand is that the iron changes its form all the time based on salinity, pH and most by alkalinity and the amount of organics and colloids in the water.

In a closed system like our aquariums, where there is high organic load and many dissolved organic colloids, the amount of free iron could be very small although the total iron could be very high. Usually this situation will lead to a darkening of the corals due to growth in zooxanthellae population and the outbreak of phytoplankton and other macroalgae, and still you may measure nill levels of iron. From the other hand , on very pure salt water, most iron will be as free iron ions which could be very toxic to the tank inhabitants. This is why when you are adding t colors C to 1 liter you can detect high iron level while few minutes later when you add the iron to the tank you measure levels around 0.05 ppm for several hours and the 0after 24 hrs. the iron may precipitated or is bond to organics.



e qui ti metto il link della discussione su RC
http://reefcentral.com/forums/showthread.php?t=2104096

il ferro ed il rame si somigliano come io con mia moglie e non vedo cosa centri con lo spur...

Ink 24-03-2012 16:49

probabilmente non c'entra niente... e non vedo cosa c'entri tua moglie con lo spur... ;-)
se hai da esporre una teoria o una verità, io ti ascolto... lungi da me dire che lo spur funziona senza ombra di dubbio come ho ipotizzato... non vorrei sembrarti sfacciato, ma io non ho ancora sentito una spiegazione sul funzionamento dello spur...
------------------------------------------------------------------------
Presumo tu abbia letto il link di RC...


Tutti gli orari sono GMT +2. Attualmente sono le 00:36.

Powered by vBulletin versione 3.8.9
Copyright ©: 2000 - 2025, Jelsoft Enterprises Ltd.
Traduzione italiana Team: AcquaPortal
User Alert System provided by Advanced User Tagging v3.2.5 Patch Level 2 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Copyright Zero Pixel Srl

Page generated in 0,12781 seconds with 13 queries